Complete Muffler

Complete Muffler

Dubach Racing Development Dr. D Complete Exhaust System – Aluminum Muffler/Stainless Header * Aluminum 2503 $199.79 Material: AluminumFeatures Stainless Steel Header and Aluminum MufflerWelded construction for reduced weight (no springs)Removable bolts at inlet cap for easy repackingIncludes Removable USFS Approved Spark Arrestor Screen* (NOTE) Stamped End CapThis Item Fits the Following Applications:2009 Kawasaki KLX1102008 Kawasaki KLX1102007 Kawasaki KLX1102006 Kawasaki KLX1102005 Suzuki DR-Z1102005 Kawasaki…

Flowmaster 943045 Super 44 Muffler – 3.00 Center IN / 3.00 Center OUT – Aggressive Sound $64.59 Flowmaster Super 44 muffler uses the same delta flow technology found In our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest soundIng, highest performIng four Inch case street muffler Flowmaster has ever built. Constructed of 16 gauge alumInized steel and fully MIG welded for maximum durability….

Dynomax 17747 Super Turbo Muffler $54.94 Dynomax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow eliminates turbulence. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The pure unadulterated power of Dynomax Super Turbo mufflers are ba…

Mustang 1964 1/2 – 73 Restoration Guide (Motorbooks Workshop) $15.94 This ultimate book of knowledge on Ford’s famous pony car has been updated to include all models through 1973. A technical reference source for an authentic restoration, judging parts and options originality, and deciphering serial numbers and data plate codes. Packed with 1,000+ photos, this book covers all first-generation Mustangs, from the earliest 1964 1/2 and 1965 models up through 1973….

How to Swap GM LS-Series Engines into Almost Anything (S-A Design) $16.46 In 1997, the LS1-powered Corvette hit the streets. At the time, the new LS1 garnered much fanfare, but in reality, its release marked a seismic advance in V-8 engine technology that ushered in a new era of performance. The LS1, featuring ground-breaking architecture, was the first of the third generation of LS engines, which delivered towering performance and efficiency from its compact design. Hi…

Donny’s Unauthorized Technical Guide to Harley Davidson 1936 to Present: Volume II: Performancing the Twin Cam $32.23 Donny Petersen offers the real deal in performancing your Harley-Davidson Twin Cam. Graphics, pictures, and charts guide the reader on a sure-footed journey to a thorough H-D Twin Cam performance understanding. Petersen’s insight makes technical issues understandable even for the novice. Donny simply explains what unfailingly works in performancing the Twin Cam. This is the second volume of Peters…

AP Muffler – AP 09/15 Complete $15.50 This is a complete replacement muffler from AP Engines….

Magnum Muffler – 30 FS, complete $32.53 This is a complete replacement muffler from Magnum for the 30FS….

Muffler – Complete: TT, BH $73.49 …

Mini Pocket Bike 2 Stroke Engine Motor 49cc Parts EN02 $84.95 Fits onto the following style of pocket bikes MTA-1 ( Cags) , MTA-2 ( MX-3), MTA-3 ( GP-RSR) MTA-4 ( Water Cool) A-4 Quads, S-4 Cobras, Evolution Quads, Mini Dirt Bikes and many more!…

250TR CARBON COMPLETE MUFFLER $539 250TR CARBON COMPLETE MUFFLER Nice traditional system utilizing stainless steel for the exhaust coupled to a carbon si..

COLLER,MUFFLER $5 Rubber parts like the part this collar fits, especially when they are around high temperatures and excess vibration don’t last forever. To ensure vibration does not find its way to areas of your bike it is not supposed to, regular replacement of the muffler rubber complete with this new collar will pay dividends in th..

Universal Superlight Muffler $314.99 SuperTrapp Universal Superlight Muffler Internal disc silencer incorporates the 4″ SuperTrapp diffuser disc system inside muffler body Fully adjustable in minutes for complete power, sound and jetting control Maximum power with minimal sound Unique body-clamp mounting system enables simple installation on most applications All mufflers are 19″ in length Stainless steel construction 2″ or 2 1/2″ inlet size Click Here for Important Exhaust Information

Muffler $139.99 93-95 Wrangler 4 Cylinder 2.5L Muffler

Racing Line Exhaust System with HEX Muffler $580.99 Akrapovic Racing Line Exhaust System with HEX Muffler This is a complete high-quality stainless steel exhaust system made from conical tubes with precision handcrafting and attention to detail. Its unique design enables it to obtain the maximum output for each specific model of a motorcycle, while significantly reducing overall weight for top performance. It is identical to our top range Evolution Line exhaust system. It only differs is in the material that is used. Features: simple mounting excellent upgrade in performance deep sound hexagonal shape muffler eye-catching product which significantly changes the appearance of the bike improved engine characteristics: more power and torque in comparison with the stock muffler and competing products high quality and exotic materials: combination of carbon-fiber, titanium and stainles steel precision workmanship choice of carbon-fiber or titanium muffler outer sleeve for some models Click Here for Additional Exhaust Information

Evolution Exhaust System with Spark Arrested HEX Muffler $715.99 The Akrapovic Racing and Evolution complete exhaust systems are the flagships of Akrapovic’s product lines. They are designed for competition-oriented MX riders who demand maximum performance from their exhaust systems. With their production quality, engine performance improvements and modern Hexagonal muffler design they satisfy the requirements of all riders. The systems are designed for two markets; in the US they are available with an approved spark arrester, and for the EU and other non-US markets they come with a noise damper. New for this year is additional chamber that helps to reduce noise emission and provides better power and torque at low rpm range. Features: Simple mounting Excellent upgrade in performance Deep sound Hexagonal shape muffler Eye-catching product which significantly changes the appearance of the bike Improved engine characteristics: more power and torque in comparison with the stock muffler and competing products High quality and exotic materials: combination of carbon-fiber and titanium Precision workmanship Choice of carbon-fiber or titanium muffler outer sleeve Lower weight in comparison with stock muffler and competing products Click Here for Additional Exhaust Information

MUFFLER STAY (STAINLESS) MUFFLER REPAIR PARTS $27 Muffler stay..

MUFFLER STAY (ALUMINUM ) MUFFLER REPAIR PARTS $36 Muffler stay..

MUFFLER ASSY (CB750K7) (O.E) $694 At last now available, and in stock complete replacement Honda K7 and K8 four silencer exhausts systems. These are OEM parts, engineered by an original supplier to Honda, so the usual high Honda manufacturing tolerances and quality of finish are maintained. Internal baffling is altered..

MUFFLER COMP.,EX. $442.5 If you are fortunate enough to own a CB750 Four K0 or K1 model, then you will be delighted to know that you can still buy genuine new production Honda exhaust systems complete, or singularly, particularly useful if you have damaged only one or one side of your machine. For..

Racing Line Exhaust with Hexagonal Muffler $485.99 Racing Line Exhaust with Hexagonal Muffler Complete replacement exhaust system that represents the first level of serious performance improvement For riders who expect sports performance, but not the extreme racing system characteristics of an Akrapovic race replica exhaust system Intended for everyday use, while offering unmatched power and torque A complete reworking of the OEM system allows increases in available power and torque over the entire rpm range – this means a smoother application At the same time the Supersport system gives the bike an unmistakable sound, noticeably lighter weight and aesthetic elegance, in most cases polished stainless steel Some Supersport models include crossover tubes installed between the header tubes, as test results indicated that for these models the crossover tubes provide increased exhaust system performance **Note: Size and shape of canister may vary slightly depending on model **Note: 2009 Honda CBR600RR is undertail exhaust **Note: BMW S1000RR ’10 Street Legal Click Here for Additional Exhaust Information

MUFFLER SPRING L=87MM $2 Muffler spring (..

Muffler by Crown Automotive for Jeep $136.99 Muffler Muffler by Crown Automotive for Jeep

97-01 Honda Prelude Catback Exhaust System $229.5 Yonaka motorsports offers complete catback exhaust which are direct fits for most popular sport compact cars.

Akrapovic Evolution Line Complete Motorcycle Exhaust System $691.95 Oval-shaped can with a titanium outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Flared or conical link pipe is made of titanium and welded to the muffler. Hex

Akrapovic Evolution Line Complete Motorcycle Exhaust System with Hexagonal Muffler $975.95 <b>Features</b><ul><li>Hexagonal-shaped can is titanium outer sleeve.</li><li>Hexagonal mufflers feature a carbon-fiber outlet cap to match the design of each bike.</li><li>Joint of the inlet cap is m

Akrapovic Evolution Line Complete Motorcycle Exhaust System with Hexagonal Muffler $975.95 <b>Features</b><ul><li>Hexagonal-shaped can is titanium outer sleeve.</li><li>Hexagonal mufflers feature a carbon-fiber outlet cap to match the design of each bike.</li><li>Joint of the inlet cap is m

Akrapovic Racing Line Complete Motorcycle Exhaust System with Hexagonal Muffler $706.95 The Akrapovic Racing Line Exhaust is designed for riders who know how to take full advantage of the specific performance benefits offered by these systems.<br /><br /><b>Features</b><ul><li>We should

Bbr Bbr Exhaust System D2 Silver C Part # 205-HCF-1531 $296.95 Do you want the absolute highest quality mini-bike exhaust system on the market? The next generation in D-Section exhaust system, the D2. This design incorporated air-craft quality stainless steel header and mid-pipes that have been tuned specifically for each model to optimize performance and power gains. A lightweight D profile muffler is used to dramatically reduce weight on all models. BBRs unique D muffler also allows for maximum tire clearance and packing volume. For all applications, the BBR D2, come as a complete system including header and muffler. A USDA Forest Service approved spark arrester is also included. If you need to reduce the db lever, BBR offers an optional Quiet Insert that will keep the neighbors happy. Thin-wall stainless steel header and mid-pipe Lightweight 6061 aluminum D-Section muffler Stainless steel heat shield USDA Forest Service approved spark arrestor All stainless-steel hardware

Bbr Bbr Exhaust System D2 Silver C Part # 205-HCF-1532 $296.95 Do you want the absolute highest quality mini-bike exhaust system on the market? The next generation in D-Section exhaust system, the D2. This design incorporated air-craft quality stainless steel header and mid-pipes that have been tuned specifically for each model to optimize performance and power gains. A lightweight D profile muffler is used to dramatically reduce weight on all models. BBRs unique D muffler also allows for maximum tire clearance and packing volume. For all applications, the BBR D2, come as a complete system including header and muffler. A USDA Forest Service approved spark arrester is also included. If you need to reduce the db lever, BBR offers an optional Quiet Insert that will keep the neighbors happy. Thin-wall stainless steel header and mid-pipe Lightweight 6061 aluminum D-Section muffler Stainless steel heat shield USDA Forest Service approved spark arrestor All stainless-steel hardware

Bbr Bbr Exhaust System D2 Silver K Part # 205-KLX-1131 $251.95 Do you want the absolute highest quality mini-bike exhaust system on the market? The next generation in D-Section exhaust system, the D2. This design incorporated air-craft quality stainless steel header and mid-pipes that have been tuned specifically for each model to optimize performance and power gains. A lightweight D profile muffler is used to dramatically reduce weight on all models. BBRs unique D muffler also allows for maximum tire clearance and packing volume. For all applications, the BBR D2, come as a complete system including header and muffler. A USDA Forest Service approved spark arrester is also included. If you need to reduce the db lever, BBR offers an optional Quiet Insert that will keep the neighbors happy. Thin-wall stainless steel header and mid-pipe Lightweight 6061 aluminum D-Section muffler Stainless steel heat shield USDA Forest Service approved spark arrestor All stainless-steel hardware

Bbr Bbr Exhaust System D2 Silver T Part # 205-YTR-1231 $269.95 Do you want the absolute highest quality mini-bike exhaust system on the market? The next generation in D-Section exhaust system, the D2. This design incorporated air-craft quality stainless steel header and mid-pipes that have been tuned specifically for each model to optimize performance and power gains. A lightweight D profile muffler is used to dramatically reduce weight on all models. BBRs unique D muffler also allows for maximum tire clearance and packing volume. For all applications, the BBR D2, come as a complete system including header and muffler. A USDA Forest Service approved spark arrester is also included. If you need to reduce the db lever, BBR offers an optional Quiet Insert that will keep the neighbors happy. Thin-wall stainless steel header and mid-pipe Lightweight 6061 aluminum D-Section muffler Stainless steel heat shield USDA Forest Service approved spark arrestor All stainless-steel hardware

COBRA BOULEVARD SLASH-CUT SLIP-ON MUFFLERS 85-08 YAMAHA VMX1200 V-MAX/VMAX $426.17 Cobra has been building the best metric cruiser exhaust for more than 25 years. The Cobra Slip-On Exhaust features the same craftsmanship and high quality fit, finish and materials as the complete systems Designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands; and that they won’t interfere with footpegs, floorboards or any other part of the motorcycle Better sound and style, with larger, longer muffler bodies than the competition Staggered dual, 3 in. diameter mufflers and all drag pipes exit on the right-hand side of the motorcycle Muffler bodies are used on the OEM headpipes, which also eliminates the original muffler box Baffles are non-removable No re-jetting necessary although it is recommended for best performance Made in the USA Actual product my vary from the web image Important Notes: **Some products may not be legal for sale or use on pollution-controlled vehicles. Check your local laws and the manufacturer’s information. **It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. **There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing. **Kawasaki VN750 1986-1999 are a two-sided exit. **Suzuki VS700/750/800 Intruder 1987-2004, S50 2005-2009, & VZ800 Marauder include full length heat shields. **Yamaha XVS650 V-Star models incle full length heat shields and use the stock headers.

COBRA TRUE DUALS EXHAUST 98-04 KAWASAKI VN1500G VULCAN NOMAD $484.63 True Dual exhaust systems are built with maximum performance and aggressive custom looks in mind. This system features mandrel bent steel tubing and specially tuned 4-inch mufflers for an aggressive performance look and sound. This True-dual system increases the performance over the stock machine while dropping more than a few unwanted pounds. Complete with heat shields that do not turn blue, this system is a vast improvement over stock. This True-Dual system increases the performance over the stock machine while dropping more than a few unwanted pounds Complete with full length 2.5 heatshields that do not turn blue Feature 4 muffler bodies that have proprietary technology to prevent blueing Deep but quiet sound Highly polished chromed billet tips are stylish finish to the classic muffler body Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models Made in the USA Actual product may vary from web image Important Notes: **Some products may not be legal for sale or use on pollution-controlled vehicles. Check your local laws and the manufacturer’s information. **It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. **There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing.

Dr.D Dr.D Raptor 660 Tail Section E Part # 1009 $359.95 The unique attributes of the DR.D s step system is that it allows for a more efficient intake stroke.? It does this by resisting the reflective exhaust pulse during the intake/exhaust overlap.? In plain language, the carefully tuned steps in the system allow for a lower net cylinder pressure, which gives a crisper throttle response from bottom to top.? The key advantage of the Step System is improved low end response with substantial gain in the mid and top ranges.? Dyno tests show a 3.6 horsepower increase at peak. Every DR.D Step System exhaust is manufactured from high-quality, 304-series stainless steel. Each step in the exhaust pipe is achieved via a precision machined ring that not only adds to the performance, but gives the DR.D pipe a distinctive look. The complete system is purged and welded in one of the nation s best manufacturing facilities. The muffler is constructed out of 6063 aluminum to lower the overall weight of the system and provide an aggressive, but pleasant, exhaust note.? DR.D used a pillow exhaust packing method to guarantee U.S.F.S. spark arrestor to allow you to use your ATV in a wide range of locales.

Dr.D Dr.D S/A Quiet Insert New Styl Part # 2905 $49.95 The unique attributes of the DR.Ds step system is that it allows for a more efficient intake stroke. It does this by resisting the reflective exhaust pulse during the intake/exhaust overlap. In plain language, the carefully tuned steps in the system allow for a lower net cylinder pressure, which gives a crisper throttle response from bottom to top. The key advantage of the Step System is improved low end response with substantial gain in the mid and top ranges. Dyno tests show a 3.6 horsepower increase at peak. Every DR.D Step System exhaust is manufactured from high-quality, 304-series stainless steel. Each step in the exhaust pipe is achieved via a precision machined ring that not only adds to the performance, but gives the DR.D pipe a distinctive look. The complete system is purged and welded in one of the nations best manufacturing facilities. The muffler is constructed out of 6063 aluminum to lower the overall weight of the system and provide an aggressive, b

FMF FACTORY 4.1 COMPLETE EXHAUST SYSTEM WITH RESONANCE CHAMBER TECHNOLOGY ANODIZED 2011 KAWASAKI KX250F $723.82 The Factory 4.1 RCT incorporates the latest in FMF Resonance Chamber Technology both internally and externally. It starts at the center with a new core – a patent pending shape enhances and refines the exhaust pressure wave for optimal power output while lowering the sound level. In addition, we achieve a shorter overall length that is less susceptible to crash damage and complementary to our Factory Forward Engineering – moving the muffler closer to the motor to centralize mass. Visible changes to the exterior include a redesigned canister to increase internal capacity for the maximum volume of packing material. The packing itself was not overlooked a proprietary blend formulated for superior durability and sound attenuation. The final component is a new rear endcap engineered for simple tuning adjustments incorporating a snap ring feature to secure the standard and optional inserts. The Factory 4.1 RCT is constructed from only aerospace grade materials that meet our exacting specifications and is manufactured 100% at our Southern California factory. Available in Natural or Anodized Titanium muffler Massive Power gains throughout the RPM range Quieter than stock Huge weight savings New RTS (Rapid Tuning System) makes for easy sound insert changes as well as adding US Forestry Approved Spark Arrestor FMF uses the highest quality proprietary blend of alloy titanium made especially to our standards #1 Exhaust in 2011 Supercross Series, 2011 Motocross Series, 2011 Motocross of Nations and 2011 Monster Energy Cup!

FMF FACTORY 4.1 COMPLETE EXHAUST SYSTEM WITH RESONANCE CHAMBER TECHNOLOGY ANODIZED 2011 KTM 350 SX-F $766.14 The Factory 4.1 RCT incorporates the latest in FMF Resonance Chamber Technology both internally and externally. It starts at the center with a new core – a patent pending shape enhances and refines the exhaust pressure wave for optimal power output while lowering the sound level. In addition, we achieve a shorter overall length that is less susceptible to crash damage and complementary to our Factory Forward Engineering – moving the muffler closer to the motor to centralize mass. Visible changes to the exterior include a redesigned canister to increase internal capacity for the maximum volume of packing material. The packing itself was not overlooked a proprietary blend formulated for superior durability and sound attenuation. The final component is a new rear endcap engineered for simple tuning adjustments incorporating a snap ring feature to secure the standard and optional inserts. The Factory 4.1 RCT is constructed from only aerospace grade materials that meet our exacting specifications and is manufactured 100% at our Southern California factory. Available in Natural or Anodized Titanium muffler Massive Power gains throughout the RPM range Quieter than stock Huge weight savings New RTS (Rapid Tuning System) makes for easy sound insert changes as well as adding US Forestry Approved Spark Arrestor FMF uses the highest quality proprietary blend of alloy titanium made especially to our standards #1 Exhaust in 2011 Supercross Series, 2011 Motocross Series, 2011 Motocross of Nations and 2011 Monster Energy Cup!

FMF FACTORY 4.1 COMPLETE EXHAUST SYSTEM WITH RESONANCE CHAMBER TECHNOLOGY TITANIUM 2011 HONDA CRF250R $765.22 The Factory 4.1 RCT incorporates the latest in FMF Resonance Chamber Technology both internally and externally. It starts at the center with a new core – a patent pending shape enhances and refines the exhaust pressure wave for optimal power output while lowering the sound level. In addition, we achieve a shorter overall length that is less susceptible to crash damage and complementary to our Factory Forward Engineering – moving the muffler closer to the motor to centralize mass. Visible changes to the exterior include a redesigned canister to increase internal capacity for the maximum volume of packing material. The packing itself was not overlooked a proprietary blend formulated for superior durability and sound attenuation. The final component is a new rear endcap engineered for simple tuning adjustments incorporating a snap ring feature to secure the standard and optional inserts. The Factory 4.1 RCT is constructed from only aerospace grade materials that meet our exacting specifications and is manufactured 100% at our Southern California factory. Available in Natural or Anodized Titanium muffler Massive Power gains throughout the RPM range Quieter than stock Huge weight savings New RTS (Rapid Tuning System) makes for easy sound insert changes as well as adding US Forestry Approved Spark Arrestor FMF uses the highest quality proprietary blend of alloy titanium made especially to our standards #1 Exhaust in 2011 Supercross Series, 2011 Motocross Series, 2011 Motocross of Nations and 2011 Monster Energy Cup!

FMF FACTORY 4.1 COMPLETE EXHAUST SYSTEM WITH RESONANCE CHAMBER TECHNOLOGY TITANIUM 2011 KTM 250 SX-F $765.22 The Factory 4.1 RCT incorporates the latest in FMF Resonance Chamber Technology both internally and externally. It starts at the center with a new core – a patent pending shape enhances and refines the exhaust pressure wave for optimal power output while lowering the sound level. In addition, we achieve a shorter overall length that is less susceptible to crash damage and complementary to our Factory Forward Engineering – moving the muffler closer to the motor to centralize mass. Visible changes to the exterior include a redesigned canister to increase internal capacity for the maximum volume of packing material. The packing itself was not overlooked a proprietary blend formulated for superior durability and sound attenuation. The final component is a new rear endcap engineered for simple tuning adjustments incorporating a snap ring feature to secure the standard and optional inserts. The Factory 4.1 RCT is constructed from only aerospace grade materials that meet our exacting specifications and is manufactured 100% at our Southern California factory. Available in Natural or Anodized Titanium muffler Massive Power gains throughout the RPM range Quieter than stock Huge weight savings New RTS (Rapid Tuning System) makes for easy sound insert changes as well as adding US Forestry Approved Spark Arrestor FMF uses the highest quality proprietary blend of alloy titanium made especially to our standards #1 Exhaust in 2011 Supercross Series, 2011 Motocross Series, 2011 Motocross of Nations and 2011 Monster Energy Cup!

FMF FACTORY 4.1 COMPLETE EXHAUST SYSTEM WITH RESONANCE CHAMBER TECHNOLOGY TITANIUM 2011 KTM 350 SX-F $765.78 The Factory 4.1 RCT incorporates the latest in FMF Resonance Chamber Technology both internally and externally. It starts at the center with a new core – a patent pending shape enhances and refines the exhaust pressure wave for optimal power output while lowering the sound level. In addition, we achieve a shorter overall length that is less susceptible to crash damage and complementary to our Factory Forward Engineering – moving the muffler closer to the motor to centralize mass. Visible changes to the exterior include a redesigned canister to increase internal capacity for the maximum volume of packing material. The packing itself was not overlooked a proprietary blend formulated for superior durability and sound attenuation. The final component is a new rear endcap engineered for simple tuning adjustments incorporating a snap ring feature to secure the standard and optional inserts. The Factory 4.1 RCT is constructed from only aerospace grade materials that meet our exacting specifications and is manufactured 100% at our Southern California factory. Available in Natural or Anodized Titanium muffler Massive Power gains throughout the RPM range Quieter than stock Huge weight savings New RTS (Rapid Tuning System) makes for easy sound insert changes as well as adding US Forestry Approved Spark Arrestor FMF uses the highest quality proprietary blend of alloy titanium made especially to our standards #1 Exhaust in 2011 Supercross Series, 2011 Motocross Series, 2011 Motocross of Nations and 2011 Monster Energy Cup!

FMF FACTORY 4.1 COMPLETE EXHAUST SYSTEM WITH RESONANCE CHAMBER TECHNOLOGY TITANIUM 2011 SUZUKI RM-Z250 $723.71 The Factory 4.1 RCT incorporates the latest in FMF Resonance Chamber Technology both internally and externally. It starts at the center with a new core – a patent pending shape enhances and refines the exhaust pressure wave for optimal power output while lowering the sound level. In addition, we achieve a shorter overall length that is less susceptible to crash damage and complementary to our Factory Forward Engineering – moving the muffler closer to the motor to centralize mass. Visible changes to the exterior include a redesigned canister to increase internal capacity for the maximum volume of packing material. The packing itself was not overlooked a proprietary blend formulated for superior durability and sound attenuation. The final component is a new rear endcap engineered for simple tuning adjustments incorporating a snap ring feature to secure the standard and optional inserts. The Factory 4.1 RCT is constructed from only aerospace grade materials that meet our exacting specifications and is manufactured 100% at our Southern California factory. Available in Natural or Anodized Titanium muffler Massive Power gains throughout the RPM range Quieter than stock Huge weight savings New RTS (Rapid Tuning System) makes for easy sound insert changes as well as adding US Forestry Approved Spark Arrestor FMF uses the highest quality proprietary blend of alloy titanium made especially to our standards #1 Exhaust in 2011 Supercross Series, 2011 Motocross Series, 2011 Motocross of Nations and 2011 Monster Energy Cup!

FMF POWER CORE 4 MUFFLERS COMPLETE W/HEADER & SPARK ARRESTOR 00-05 YAMAHA TT-R125L $186.68 When designing the PowerCore4, we looked at our top of the line products to deliver race-inspired performance at an economical price. The end result is a quality muffler with improved torque, increased horsepower and rugged durability all at a price that wont break the bank. Overall increase in power and torque Durable stainless steel and aluminum construction Advanced packing material for maximum longevity Champagne color anodized can Removable spark arrestor included Optional 96dB quiet insert available

FMF POWER CORE 4 MUFFLERS COMPLETE W/HEADER & SPARK ARRESTOR 00-05 YAMAHA TT-R90 $186.03 When designing the PowerCore4, we looked at our top of the line products to deliver race-inspired performance at an economical price. The end result is a quality muffler with improved torque, increased horsepower and rugged durability all at a price that wont break the bank. Overall increase in power and torque Durable stainless steel and aluminum construction Advanced packing material for maximum longevity Champagne color anodized can Removable spark arrestor included Optional 96dB quiet insert available

FMF POWER CORE 4 MUFFLERS COMPLETE W/HEADER & SPARK ARRESTOR 01-03 HONDA XR80R $186.03 When designing the PowerCore4, we looked at our top of the line products to deliver race-inspired performance at an economical price. The end result is a quality muffler with improved torque, increased horsepower and rugged durability all at a price that wont break the bank. Overall increase in power and torque Durable stainless steel and aluminum construction Advanced packing material for maximum longevity Champagne color anodized can Removable spark arrestor included Optional 96dB quiet insert available

FMF POWER CORE 4 MUFFLERS COMPLETE W/HEADER & SPARK ARRESTOR 86-00 HONDA XR80R $186.04 When designing the PowerCore4, we looked at our top of the line products to deliver race-inspired performance at an economical price. The end result is a quality muffler with improved torque, increased horsepower and rugged durability all at a price that wont break the bank. Overall increase in power and torque Durable stainless steel and aluminum construction Advanced packing material for maximum longevity Champagne color anodized can Removable spark arrestor included Optional 96dB quiet insert available

Knitting Project: Silk Muffler (Quamut) $2.95 Quamut is the fastest, most convenient way to learn how to do almost anything. From tasting wine to managing your retirement accounts, Quamut gives you reliable information in a concise chart format that you can take anywhere. Quamut charts are:Authoritative: Written by experts in their field so you have the most reliable information available. Clear: Our explanations take you step-by-step through everything from performing CPR to threading a needle. Concise: You’ll learn just what you need to know—no more, no less. Precise: Quamut charts include detailed text, photos, and illustrations to show you exactly how to do just about anything. Portable: Your know-how goes with you wherever your projects lead.Knit a luscious and fun silk scarf.Because of the pretty bouclé trim at the ends of this scarf, you’ll love the way it swings while you walk. The variegated silk yarn gives this simple scarf visual interest and plenty of drape. This project gives you:Complete step-by-step instructions A list of all the materials you’ll need

Lucky Louie-Complete 1st Season $24.98 Get lucky with Lucky Louie – the comedy with an adult twist. Louis C.K. stars as Louie, a part-time mechanic of a muffler shop, who spends most of his time at home taking care of his four-year-old daughter, Lucy, while his wife, Kim, the real breadwinner, works as a full-time nurse. This 2-disc collection includes all 12 episodes from The Complete First Season of the HBO comedy!

Michigan Industrial Tools Air Chisel Set – 9 Piece $31.95 MIT 9-PC. AIR CHISEL SET features: Sandblasted, Hardened Chrome Molybdenum Steel, Precision Machined Tips, Universal Fit for Air Hammers using.401 Shank, Complete with Roll-up Vinyl Pouch, 4-pc. 5 Chisels: Ripping Chisel, End Cutter, Rivet Cutter, Tapered Punch, 5-pc. 7 Chisels: Muffler Remover, Cut-off Chisel, Panel Cutter, Long Blade Panel Cutter, Rivet Cutter.

Python Slip-On Muffler $229.95 Get the famous Python 3 look and performance while still using the stock header pipes. Use the same baffle as the Python 3 full systems. Embossed Python logo. Comes complete with all necessary mountin

Ready, Set, Go!: 35 Around-The-Town Adventures with God $49.09 Nothing like a change of scene to get your kids excited and involved! How about a muffler shop? Or an animal shelter? They are among the sites suggested for 35 off-site Bible lessons — complete with teaching ideas and learning activities.

Ready, Set, Go!: 35 Around-The-Town Adventures with God $47.93 New – Nothing like a change of scene to get your kids excited and involved! How about a muffler shop? Or an animal shelter? They are among the sites suggested for 35 off-site Bible lessons–complete with teaching ideas and learning activities–for elementary kids.

SG Tool Aid SGT33700 Deluxe Vacuum and Fuel Pump Tester $36.31 Features and Benefits: Widely used in motor diagnostic work Check for leaky intake manifold clogged muffler and leaky burnt or sticky valves Diagnoses incorrect timing Determines accurate fuel pump pressure Locates leaks in gas lineReadings shown and interpreted on face of multi-colored dial. 31/2? gage has English and metric scales. Has range of 0-28 Inch (0-70 Cm) vacuum and 0-10 PSI (0-0.7 Kg/Cm2) pressure. Complete with hose three fittings and operating instructions. Fuel pump specs by manufacturer and model supplied. Packaged in a storage pouch.

07 08 YAMAHA R1 YZF RACE PERFORMANCE MUFFLER EXHAUST SYSTEM CARBON FIBER